Click to enlarge

Holley 0-86670RD Ultra Street Avenger Carburetor

Holley 0-86670RD Holley Ultra Street Avenger 670 cfm carburetor.

The clean, polished look coupled with red anodized metering blocks and throttle body will certainly set your ride apart whether you are at the show or track.

The Ultra Street Avenger Carburetors feature all aluminum construction and are equipped with metering blocks and a base plate made from 6061–T6 billet aluminum.

Approximately 5 lbs less weight than a comparable zinc carburetor.

Red anodized billet aluminum metering blocks and base plate with gold Irridite hardware.

Electric choke for easy cold starting and warm up.

Vacuum secondaries allow use on a wide variety of vehicles.

Aluminum construction for weight savings and long lasting shine. Tumble polished aluminum finish.

Quick change vacuum secondaries for easy tuning to optimize performance or fuel economy.

Four vacuum ports for all necessary vacuum accessories. 1 timed (spark) port, 2 full vacuum, and 1 PCV port.

Factory preset “No trouble” electric choke for easy start ups.

Built–in fuel filters.

4 corner idle.

Dual fuel inlets.

Includeds a fuel line kit so there are no unnecessary trips back to the parts store.

Clear fuel level sight glass for easy, no mess fuel level adjustments.

Ford A/T kickdown. (Does not work with AOD transmissions.)

Holley 0-86670RD Ultra Street Avenger carburetor 670 cfm 0-86670RD$557.97

Click to enlargeHolley 0-86670 Ultra Street Avenger fuel line
Holley 0-86670 Ultra Street Avenger fuel line.

Chrome plated.

Features a hose barb for 3/8" hose.

1/8" pipe port for attaching a fuel pressure gauge.

10TD2197$25.99
Holley 0-86670 Utra Street Avenger fuel line with gauge
Holley 0-86670 Ultra Street Avenger fuel line with fuel pressure gauge.

Chrome plated.

Convenient 1 1/2" diameter fuel pressure gauge that reads 10-15 psi.

Gauge is designed to read in 1/2 pound increments.

Includes inverted flare 5/8"-18 female carburetor inlet fittings that are chrome plated.

Inlet features a versatile 3/8" NPT female thread.

Includes a 3/8" hose barb. Easily adapted to AN fittings.

10MRG-1559$54.97
Click to enlargeHolley 0-86670 Ultra Street Avenger braided fuel line -6AN
Holley 0-86670 Ultra Street Avenger braided fuel line.

Braided stainless steel line with anodized -6AN fittings.

Built in carburetor inlet fittings.

Built in stainless steel filter screens.

Includes a 1/8" pipe port for use with fuel pressure gauges.

Inlet fittings measure 7/8-20 with 9 13/32" spacing.

Male AN-6 fuel line inlet fittings are on either end of the line and includes a cap to cap of one end.

This line can recieve fuel from either end.

All of these features make this the best dual feed fuel inlet line available!

PRP-10415$64.97
Click to enlargeHolley 0-86670 Ultra Street Avenger gasket
Holley 0-86670 Ultra Street Avenger gasket.

A carburetor heat insulating base plate to intake manifold gasket.

Designed for use with the Holley carburetor shown above.

Extra thick, .0320 to insulate the carburetor from heat to provide a cooler, denser fuel mixture for more power.

While the Holley carburetor shown above comes with a thin base gasket, this extra thick heat insulating gasket allows the carburetor to run cooler which provides a denser fuel mixture for more power.

Available either as a divided gasket (#9266) for use with dual plane intake manifolds and an open center gasket (#9265) for use with single plane intakes. Find your style in the applications drop down box.

Includes longer carburetor mounting studs to provide for the additional thickness of the gasket.

25E9266-9265$22.99APPLICATIONS:: 
Click to enlargethrottle, kickdown, cable bracket
Intake mounted bracket for throttle cable, Turbo 350 kickdown cable and cruise control cable.

Designed for use with the Holley carburetor shown above.

Fits Chevy small block.

All three positions are fully length adjustable.

Mounts to the back intake manifold bolts on the drivers side of the engine.

Super sturdy, heavy metal design with a durable gold iridited quality finish.

25E-8036$29.97
Click to enlargeHolley 0-806670  chrome throttle bracket
Intake mounted bracket for throttle cable, Turbo 350 kickdown cable and cruise cable.

Designed for use with the Holley carburetor shown above.

Fits Chevy small block.

All three positions are fully length adjustable.

Mounts to the back intake manifold bolts on the drivers side of the engine.

Super sturdy, heavy metal design with attractive chrome show car quality finish.

25E-8030$49.99
Click to enlargeHolley 0-8667 Ultra Street Avenger throttle bracket
Holley 0-806670 Utra Street Avenger throttle bracket.

Mounts throttle cable, Turbo 350 transmission kick down cable bracket.

Designed for use with the Holley carburetor shown above.

All positions are fully length adjustable.

Chrome plated.

Mounts to the drivers side rear carburetor mounting stud.

Easy to install and make for a clean installation.

25S-24283$22.99
Click to enlargeHolley 0-86670 Ultra Street Avenger throttle return springs
Holley 0-86670 Ultra Street Avenger throttle return springs.

A pair of throttle return springs, universal in design and engineered to provide positive throttle return for increased safety.

Works great with the Holley carburetor shown above and the throttle cable brackets shown.

Inner and outer spring are Electro-Nickel bright plated to resist rust.

Includes chrome-plated bracket that attaches to the drivers side, rear carburetor mounting stud.

Springs can also mount to the throttle cable bracket.

The other end of the springs fit into the bottom hole of the carburetors throttle linkage arm.

Can also be used with many different throttle cable bracket designs.

25MRG-19$10.99
Click to enlargeHolley 0-86670 Ultra Street Avenger throttle cable stud GM
Holley 0-86670 Ultra Street Avenger throttle cable stud.

GM throttle linkage stud to attach your GM throttle cable to the throttle linkage arm of the Holley carburetor.

Installs into the large upper hole on the carburetors throttle linkage arm and may require a bushing to space the hole.

7/32" diameter.

25H20-37$7.99
Click to enlargeHolley 0-8670 Ultra Street Avenger turbo 350 kickdown cable stud
Holley 0-806670 Ultra Street Avenger Turbo 350 kickdown cable stud.

This stud mounts the GM Turbo 350 kick down cable to the Holley carburetors throttle linkage arm.

Slips into the cables slider.

25H20-40$7.99
Click to enlargeHolley 0-80670 Ultra Street Avenger throttle cable ball stud assortment
Holley 0-86670 Ultra Street Avenger throttle ball stud.

A ball stud throttle stud assortment.

Provides several ball sizes and stud sizes for various non-GM cables.

Attaches to the Holley carburetors throttle linkage arm, in the large upper hole.

Requires a hole bushing for installation.

25H20-2$14.99
Click to enlargeSee more carbs and manifolds Click Here!
Check out our complete selection of Holley, Edelbrock, Demon and Proform carburetors. If you need an intake manifold we have all the Edelbrock, Weiand, Holley and Professional Products intakes.


PayPal Acceptance Mark




We welcome CANADIAN customers! For ordering information, click on "Orders To Canada" at the top left side of this page.

We will not ship to freight forwarding - expediting companies.

PAYMENT METHODS: PayPal, Visa, Mastercard, Discover, American Express, money orders.

ecommerce provided by Yahoo! Small Business