Holley 0-86770BL Holley Ultra Street Avenger 770 cfm carburetor.
The clean, polished look coupled with blue anodized metering blocks and throttle body will certainly set your ride apart whether you are at the show or track.
The Ultra Street Avenger Carburetors feature all aluminum construction and are equipped with metering blocks and a base plate made from 6061–T6 billet aluminum.
They weigh in at approximately 5 lbs less than a comparable zinc carburetor.
Blue anodized billet aluminum metering blocks and base plate with gold Irridite hardware.
Electric choke for easy cold starting and warm up.
Vacuum secondaries allow use on a wide variety of vehicles.
Aluminum construction for weight savings and long lasting shine. Tumble polished aluminum finish.
Quick change vacuum secondaries for easy tuning to optimize performance or fuel economy.
Four vacuum ports for all necessary vacuum accessories. 1 timed (spark) port, 2 full vacuum, and 1 PCV port.
Factory preset “No trouble” electric choke for easy start ups.
Dual fuel inlets.
Built–in fuel filters.
4 corner idle.
Includes a fuel line kit so there are no unnecessary trips back to the parts store.
Clear fuel level sight glass for easy, no mess fuel level adjustments.
Ford A/T kickdown. (Does not work with AOD transmissions.)
We recommend this fuel line for use with the Holley 0-81870 Street Avenger carburetor shown above. Inlet features built in hose barb for use with 3/8" hose and a 1/8" NPT port for attaching a fuel pressure gauge. Chrome plated.
We recommend this fuel line upgrade with fuel pressure gauge for use with the Holley 0-81870 Street Avenger carburetor. This fuel line is not only great looking but is very functional.
Incorporates a small, convenient 1 1/2" diameter fuel pressure gauge that reads 10-15 psi. The gauge is designed to read in 1/2 pound increments.
Line inlet features a versatile 3/8" NPT thread. Includes a 3/8" hose barb. Easily adapted to AN fittings.
We recommend this fuel line upgrade for use with the Holley 0-81870 Street Avenger carburetor.
Made from aircraft quality buna-N neoprene hose encased in braided stainless steel, this fuel line kit is temperature, gas and oil resistant. The fuel line is adjustable between the carb bowls from 7 1/2" to 11 1/2".
Includes a 1/8" pipe fitting for use with a fuel pressure gauge. Exits with a versatile, user friendly female 3/8" NPT fitting for use with hose barbs or pipe to AN fittings.
We recommend this dual throttle return spring for use with the Holley 0-81870 Street Avenger carburetor shown above.
Universal in design and engineered to provide positive throttle return for increased safety. Inner and outer spring are Electro-Nickel bright plated to resist rust. Includes chrome-plated bracket that attaches to the drivers side, rear carburetor mounting stud. This spring kit can also be used with many different throttle cable bracket designs.
A carburetor heat insulating divided base gasket. Designed for use with the Holley carburetor shown above.
Extra thick, .0320 to insulate the carburetor from heat to provide a cooler, denser fuel mixture for more power.
While the Holley carburetor shown above comes with a thin base gasket, this extra thick heat insulating gasket allows the carburetor to run cooler which provides a denser fuel mixture for more power.
Available either as a divided gasket (#9266) for use with dual plane intake manifolds and an open center gasket (#9265) for use with single plane intakes. Find your style in the applications drop down box.
Includes longer carburetor mounting studs to provide for the additional thickness of the gasket.
Provides a Chevy mounting bracket for the throttle cable, Turbo 350 kickdown cable and cruise control cable. Designed for use with the Holley carburetor shown above. Fits Chevy small block. All three positions are fully length adjustable. Mounts to the back intake manifold bolts on the drivers side of the engine.
Super sturdy, heavy metal design with a durable gold iridited quality finish.
Chrome throttle cable, Turbo 350 kickdown cable and cruise cable bracket. Desgined for use with the Holley carburetor shown above. Fits Chevy small block. All three positions are fully length adjustable. Mounts to the back intake manifold bolts on the drivers side of the engine.
Super sturdy, heavy metal design with attractive chrome show car quality finish.
GM throttle cable, Turbo 350 transmission kick down cable bracket. Designed for use with the Holley carburetor shown above. All positions are fully length adjustable. Chrome plated. Mounts to the drivers side rear carburetor mounting stud. Easy to install and make for a clean installation.
GM throttle linkage stud to attach your GM throttle cable to the throttle linkage arm of the Holley carburetor. Installs into the large upper hole on the carburetors throttle linkage arm and requires a bushing to space the hole. 7/32" diameter.
This stud mounts the GM Turbo 350 kick down cable to the Holley carburetors throttle linkage arm. Slips into the cables slider.
A ball stud throttle stud assortment. Provides several ball sizes and stud sizes for various non-GM cables. Attaches to the Holley carburetors throttle linkage arm, in the large upper hole. Requires a hole bushing for installation.
Check out our complete selection of Holley, Edelbrock, Demon and Proform carburetors. If you need an intake manifold we have all the Edelbrock, Weiand, Holley and Professional Products intakes.
|HOW TO ORDER:|
1. If there is an applications box, click, then scroll the applications box to find your vehicle.
2. Click on your vehicle.
3. Click "add to cart"
4. Enter your information and submit order.
5. If there is no applications box, then just click "add to cart", then enter your information.
HOURS: 11:00 am to 6:00 pm Monday - Friday Eastern Standard Time
We welcome CANADIAN customers! For ordering information, click on "Orders To Canada" at the top left side of this page.
We will not ship to freight forwarding - expediting companies.
PAYMENT METHODS: PayPal, Visa, Mastercard, Discover, American Express, money orders.