Click to enlargeFord 302 Forged Steel Crankshaft

Eagle 430230015090 Eagle ESP Ford 302 forged steel crankshaft.

Not balanced, designed to be internally balanced.

3.000" stroke.

2.123" diameter rod journal.

Rod journal width is 1.680".

Main journal is 2.249".

Bobweight is 1750.

Minimum rod length is 5.090.

Approximate weight is 46-47 lbs.

Two piece rear seal design.

Has 6 flywheel bolt holes.

Provides 302 cubic inches with a standard bore.

Provides 305 cubic inches with a .020 overbore.

Provides 306 cubic inches with a .030 overbore.

Provides 308 cubic inches with a .040 overbore.

Provides 311 cubic inches with a .060 overbore.

Eagle ESP 4340 forged steel crankshafts feature exceptional strength and unsurpassed quality at a reasonable price.

Forged in a non-twist forging and each crankshaft undergoes a multi-stage heat treatment process as well as stress relieving, shot peening, and nitriding.

Manufactured with a 0.125" radius on all journals, rear seal and snout for added strength so chamfered bearings must be used.

Each crankshaft is inspected for dimension, size and stroke accuracy.

Target bobweight is +/- 2%.

Recommended in applications up to 1500 horsepower. Designed for internal balance.

Lightening holes in each rod throw for reduced weight.

TECH NOTE: Stock 302 stroke is 3.000". Stock 302 bore is 4.000". Stock 302 rod length is 5.090".

TECH NOTE: Recommend MS590H main bearings and CB634HN rod bearings.

INSTALLATION TECH NOTE: Will NOT work with AOD or AODE torque converters that have the "long snout design". Be sure to check this before ordering. If using an AOD transmission, this crankshaft will only work with "short snout" AOD or AODE converters.

The Eagle 430230015090 Ford 302 forged steel crankshaft makes building a reliable engine easier.

Eagle 430230015090 Ford 302 forged steel crankshaft 3.000 stroke EAGLE-430230015090$638.97

Click to enlarge Ford 302 H-Beam rods for Eagle 430230015090 crank
Eagle CRS5090F3D Ford 302 5.0L H-Beam connecting rods.

This set of rods are designed for use with the Eagle 430230015090 crankshaft shown above.

Features stock length of 5.090".

Weight is 590 grams.

Forged from 4340 steel.

7/16" ARP 8740 bolts with precision alignment sleeves that locate the rod cap to help maintain big end bore size and eliminate cap walk.

Packaged in a weight-matched set (+or- 1 gram).

Sizing is done on the state of the art Sunnen Krossgrinding system.

All Eagle ESP Connecting Rods are multi-stage heat treated, magna-fluxed, and sonic tested.

The Eagle ESP series connecting rods are manufactured from a two-piece forging. The forging process forces the grain into the shape of a connecting rod, resulting in a superior fatigue life.

The rod cap is forged separately so that the grain runs perpendicular to the load forces, which strengthens the rod.

Also, a higher content of nickel and chrome is used, which increases the strength and fatigue life without making the rod brittle.

Extensive testing has proven the Eagle two-piece forging to be superior to any one-piece forging on the market!

Eagle ESP connecting rods are the perfect choice for engines up to 750 horsepower.

Sold as a set of 8 Eagle ESP H-Beam connecting rods.

Click to enlargeFord 302 main bearings rod bearings for Eagle 430230015090 crank
Clevite main bearings and rod bearings for Ford 302.

Use this bearing set with the Eagle 430230015090 crankshaft shown above.

characteristics of H Series bearings: Medium level of eccentricity and high crush.

Enlarged chamfers for greater crankshaft fillet clearance.

Made without flash plating for better seating

Use with crankshafts that have oversized fillets and with engines that run mid-high RPM ranges.

Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface.

Clevite MS590H-standard main bearings.

Clevite CB634HN-standard rod bearings.

Click to enlargeFord 302 Forged Pistons for Eagle 430230015090 crank
SRP 138734 Ford 302 flat top pistons.

For use with the Eagle 430230015090 crankshaft shown above.

Sold as a set of 8 forged pistons.

Includes wrist pins.

.030 overbore.

Bore size is 4.030".

CNC machined ring grooves accept 1/16" and 1/16" and 3/16" rings.

Dome volume is a -5CC.

Weight is 513 grams.

-.010 deck height.

Wrist pins are 912 X 2750 X 140 wall.

Designed for stock rod length of 5.090".

Stroke is 3.000".

Compression height is 1.600".

Provides a 10.2 compression ratio with 58cc heads.

Provides a 9.7 compression ratio with 64cc heads.

Provides a 9.2 compression ratio with 72cc heads.

TECH NOTE: Fits Ford TFS, GT40, Canfield, Brodix Track 1, OEM heads and Dart windsor heads. Will not fit Twisted Wedge or Edelbrock 7721 heads or N361 heads.

Made of 4032 wrought aluminum alloy.

Designed for street and strip applications utilizing compression ratios that are compatible with pump gas.

These pistons also provide a quieter engine on cold start-up.

Features symetrical valve pockets fully radiused.

Honed pin bore, forged side relief.

Full floating wrist pin.

Double spiro locks.

Machined oil drain back holes (not slotted).

Pressure fed pin oilers.

SRP pistons are forged from wrought alluminum alloys. Wrought aluminum is 20% stronger than aluminum bar stock and 50% stronger than cast aluminum pistons. SRP uses only the highest grade wrought aluminum alloys to make a stronger, lighter piston. These aerospace quality alloys have been rigourously tested and found to be the most durable material for this application. To optimize the weight of the piston, application specific forgings are designed in 3D computer modeling programs. This makes it possible to have consistent dome thickness which will not compromise the durability of the piston. All SRP pistons feature fully CNC machined domes, dishes and valve reliefs to give you precise compression ratios and consistent weights. All SRP pistons incorporate CNC diamond turned skirts to provide you with a better, more consistent finish, and have CNC honed pin bores and are thoroughly deburred prior to cleaning and packaging so no prep work is required. SRP pistons are ready to run right out of the box.

ORDERING NOTE: Pistons are not returnable. Please be sure to check your engines oversize requirements, cam requirements and head and piston to valve clearance requirements before ordering. We recommend that this be done by an experienced and competant engine builder.


PayPal Acceptance Mark

We welcome CANADIAN customers! For ordering information, click on "Orders To Canada" at the top left side of this page.

We will not ship to freight forwarding - expediting companies.

PAYMENT METHODS: PayPal, Visa, Mastercard, Discover, American Express, money orders.

ecommerce provided by Yahoo! Small Business