Edelbrock Performer Intake Manifold
For Vortec - With Endurashine Finish

Edelbrock 21164 Edelbrock Performer intake manifold.

For Chevy Vortec small block engines.

The Endurashine coating provides a bright, maintenance free, chrome finish with the durability of a powder coated finish.

Resists discoloration from heat.

Clear top coat enhances the polished aluminum look for a great appearance.

The Endurashine finish consists of a 3 step vacuum metalizing process. A base coat, an aluminum coat, and a clear coat.

Now you can have a shine like chrome without the constant buffing and polishing maintenance of a polished aluminum intake!

Has provisions for external water bypass.

May be used on either Vortec blocks or 1995 and earlier blocks.

Accepts both spreadbore and square bore carburetors.

Will not fit under the stock Corvette hood.

Power band from idle to 5,500 rpm.

Manifold measures 3.87" tall in the front and 5.28" tall in the rear.

Ports are 2.05" tall.

Recommend 500 cfm to 650 cfm carburetors.

No EGR provisions, street legal for pre-emissions equipped engines and vehicles.

SCROLL DOWN THE PAGE FOR: Intake manifold accessories, carburetors and carburetor acccessories.

Edelbrock 21164 Performer Vortec intake manifold EDELBROCK-21164$350.97

Click to enlargeVortec intake manifold gaskets for Edelbrock 21164 intake
Edelbrock 7235 high performance intake gasket for Chevy Vortec small block engines.

Designed for use with the Edelbrock 21164 intake manifold shown above.

MP-2N Micropore technology uses no solvents in the construction of the gasket, making it environmentally friendly.

Impervious to most chemicals, this synthetic fiber composite provides a high recovery under load.

This means that when compressed, the gasket will conform to any imperfections on the sealing surface even using lower flange pressures.

A nitrite bead around each port opening makes the seal even better.

1EDE-7235$39.97
Click to enlargeVortec intake manifold bolts for Edelbrock 21164 intake
ARP 134-2002 intake manifold bolt kit for Chevy small block engines.

Features an attractive and durable black oxide coating.

Hexagon bolt heads for easy wrench or socket access.

These chrome moly bolts have a wide underhead flange with companion washers that provide an even load distribution. Precision rolled threads prevent galling while promoting more consistent torque loading.

Fits the Edelbrock 21164 intake manifold shown above.

ARP-134-2002$39.97
Click to enlargeVortec stainless intake manifold bolts for Edelbrock 21164 intake
ARP 434-2002 polished stainless steel intake manifold bolt kit for Chevy small block engines.

These stainless steel bolts and washers feature a show polished finish.

Hexagon bolt heads for easy wrench or socket access.

This bolt set has a wide underhead flange with companion washers that provide an even load distribution.

Precision rolled threads prevent galling while promoting more consistent torque loading.

Fits the Edelbrock 21164intake manifold shown above.

ARP-434-2002$49.97
Click to enlargeSwiveling Water Neck for Edelbrock intake manifold
Swiveling water neck for Edelbrock intake manifold.

This unique water neck has 90 degree angle and can swivel 360 degrees to allow for perfect positioning of the outlet in relation to the radiator opening.

This allows for easier water hose selection and positioning.

Tightening the bolts locks the neck in the angle you choose.

Made of show polished aluminum.

O-ring gasket for a quality seal.

Includes 2 chrome allen bolts that fit recessed into the base for a custom, finished appearance.

No more rusting chrome water necks and unattractive hexagon head bolts!

All-30170$29.97
Click to enlargeChrome Distributor Clamp for Edelbrock Intake Manifold
Chrome distributor clamp for Edelbrock intake manifold.

This clamp holds the distributor securely in place for accurate timing.

Brightly chrome plated.

Serrations on the bottom prevent distributor rotation.

Includes bolt and distributor gasket.

MRG-1009$9.97
Click to enlargeChrome Coil Bracket
GM intake mounted coil bracket.

This chrome plated bracket makes it easy to mount a high performance coil or remount your stock coil.

OEM vertical mount design, attaches to the intake manifold in the stock location.

MRG-9767$9.97
Click to enlargeHolley 570 CFM Carburetor
Holley 0-80570 Holley Street Avenger 570 CFM carburetor is designed to be street ready, right out of the box for stock or mildly modified engines and is specifically calibrated for the street.

Some modified engines may require tuning by jet changes or power valve changes.

A popular carburetor often used with the intake manifold shown above.

The Holley Street Avenger 570 CFM carburetor provides precise fuel metering for low end torque, awesome acceleration.

Close limit jetting is used for precise performance and the air-fuel idle is tuneable to provide the ultimate in performance with crisper acceleration.

Four vacuum ports.

Easy to use electric choke.

Clear sight plugs for easy float adjustments.

Built in secondary fuel filters.

"no touble" power valves.

Includes a "quick change" vacuum secondary housing for easy spring changes.

The Holley Street Avenger 570 CFM carburetor fits any "square bore" intake such as Edelbrock, Weiand, Holley, Offenhauser, or intakes with dual bolt patterns such as Edelbrock's 2101 Performer intake for the small block Chevy. When using the stock GM Quadrajet intake, a carburetor adapter must be used.

Installation instructions and hardware included.

HLY-0-80570$421.97
Click to enlargeHolley 600 CFM carburetor
Holley 0-80457S Holley model 4160 600 cfm carburetor.

The Holley 0-80457S carburetor is calibrated for excellent street performance.

A popular carburetor often used with the intake manifold shown above.

Side hung floats.

Electric choke.

Ford automatic transmission kick down.

Has 2 full manifold vacuum ports and 1 timed vacuum port.

Single fuel feed with a banjo fuel inlet fitting allows low profile air cleaner assemblies.

Universal calibration, possible jet or powervalve changed may be required to custom tune this carb to match your particular engine combination.

Base gasket included.

HLY-0-80457S$329.97
Click to enlargeEdelbrock 600 CFM Carburetor
Edelbrock 1406 Performer carburetor.

Edelbrock Performer 600 cfm carburetor with electric choke.

A popular carburetor often used with the intake manifold shown above.

The Edelbrock 1406 Performer carburetor is designed for small block engines with dual plane intake manifolds.

Includes both timed and full vacuum ports for ignition advance.

Includes installation instructions.

The Edelbrock 1406 Perfomer carburetors are quality built and designed to withstand the rigors of daily driving while delivering consistent, reliable street performance.

Metering rods are unaffected by engine backfires and can be changed in seconds for custom tuning without fuel spillage, fuel draining, or removing the carburetor from the manifold.

No power valves to blow out.

An all aluminum two piece body construction allows for no gaskets below the fuel level to prevent leakage. Jets, floats, needles, springs and metering rods can be changed without fuel spillage, with the carburetor installed on the engine.

Edelbrock Performer carburetors "hold a tune" which means that, compared to other brands, when you tune the carburetor to your engine, it stays tuned and remains reliable and consistent.

The outside of the carburetor body is ball burnished for a bright finish.

The Performer series carburetors are user friendly and easy to tune for trouble free service.

EDE-1406$349.97
Click to enlargeHolley 650 CFM spreadbore carburetor
Holley 0-80555C Holley 650 cfm spread bore carburetor model number 4175.

A popular carburetor often used with the intake manifold shown above.

A good replacement for the GM Quadrajet carburetor. Electric choke, single feed fuel inlet.

Vacuum ports for PCV, EGR, power brakes, distributor, air cleaner and canister.

Base gasket included.

Universal calibration, some tuning in the nature of jet changes or power valve changes may be required to match this carburetor to your specific engine combination.

HLY-0-80555C$499.97

PayPal Acceptance Mark




We welcome CANADIAN customers! For ordering information, click on "Orders To Canada" at the top left side of this page.

We will not ship to freight forwarding - expediting companies.

PAYMENT METHODS: PayPal, Visa, Mastercard, Discover, American Express, money orders.

ecommerce provided by Yahoo! Small Business