Edelbrock Performer EPS Intake Manifold

Edelbrock 2701 Performer EPS intake manifold.

Fits 1986 and older Chevy small blocks.

The Edelbrock 2701 Performer EPS intake manifold is a dual plane designed to deliver superior performance with square bore carburetors.

Runner design is tuned for peak torque around 3,500 rpm on the 350 ci small block.

Ideal for power from off idle to 5,500 rpm.

Dyno tests showed gains of 5 horsepower and 9 ft lbs of torque over the Edelbrock 2101 intake.

Measures 3.74" tall in the front and 4.80" tall in the rear.

Port dimensions are 1.87" tall by 1.15" wide.

Recommend 500 cfm to 650 cfm carburetors.

No EGR, street legal for pre-emissions equipped engines and vehicles.

Edelbrock 2701 Performer EPS intake manifold EDELBROCK-2701$159.97

Click to enlargeIntake manifold gasket for Edelbrock 2701 intake
Edelbrock 7201 high performance intake gasket for Chevy small block engines.

Designed for use with the Edelbrock 2701 intake manifold shown above.

MP-2N Micropore technology uses no solvents in the construction of the gasket, making it environmentally friendly.

Impervious to most chemicals, this synthetic fiber composite provides a high recovery under load.

This means that when compressed, the gasket will conform to any imperfections on the sealing surface even using lower flange pressures.

A nitrite bead around each port opening makes the seal even better.

4EDE-7201$24.97
Click to enlargeIntake manifold bolt kit for Edelbrock 2701 intake
ARP 134-2001 intake manifold bolt kit for Chevy small block engines.

Features an attractive and durable black oxide coating.

Hexagon bolt heads for easy wrench or socket access.

These chrome moly bolts have a wide underhead flange with companion washers that provide an even load distribution.

Precision rolled threads prevent galling while promoting more consistent torque loading.

Fits the Edelbrock 2701 intake manifold shown above.

2ARP-134-2001$34.97
intake manifold stainless bolt kit for Edelbrock 2701 intake
ARP 434-2001 polished stainless steel intake manifold bolt kit for Chevy small block engines.

These stainless steel bolts and washers feature a show polished finish.

Hexagon bolt heads for easy wrench or socket access.

This bolt set has a wide underhead flange with companion washers that provide an even load distribution.

Precision rolled threads prevent galling while promoting more consistent torque loading.

Fits the Edelbrock 2701 intake manifold shown above.

2ARP-434-2001$49.97
Click to enlargeHolley 570 CFM Carburetor
Holley 0-80570 Holley Street Avenger 570 CFM carburetor is designed to be street ready, right out of the box for stock or mildly modified engines and is specifically calibrated for the street.

Some modified engines may require tuning by jet changes or power valve changes.

A popular carburetor often used with the intake manifold shown above.

The Holley Street Avenger 570 CFM carburetor provides precise fuel metering for low end torque, awesome acceleration.

Close limit jetting is used for precise performance and the air-fuel idle is tuneable to provide the ultimate in performance with crisper acceleration.

Four vacuum ports.

Easy to use electric choke.

Clear sight plugs for easy float adjustments.

Built in secondary fuel filters.

"no touble" power valves.

Includes a "quick change" vacuum secondary housing for easy spring changes.

The Holley Street Avenger 570 CFM carburetor fits any "square bore" intake such as Edelbrock, Weiand, Holley, Offenhauser, or intakes with dual bolt patterns such as Edelbrock's 2101 Performer intake for the small block Chevy. When using the stock GM Quadrajet intake, a carburetor adapter must be used.

Installation instructions and hardware included.

HLY-0-80570$421.97
Click to enlargeHolley 600 CFM carburetor
Holley 0-80457S Holley model 4160 600 cfm carburetor.

The Holley 0-80457S carburetor is calibrated for excellent street performance.

A popular carburetor often used with the intake manifold shown above.

Side hung floats.

Electric choke.

Ford automatic transmission kick down.

Has 2 full manifold vacuum ports and 1 timed vacuum port.

Single fuel feed with a banjo fuel inlet fitting allows low profile air cleaner assemblies.

Universal calibration, possible jet or powervalve changed may be required to custom tune this carb to match your particular engine combination.

Base gasket included.

HLY-0-80457S$329.97
Click to enlargeEdelbrock 600 CFM Carburetor
Edelbrock 1406 Performer carburetor.

Edelbrock Performer 600 cfm carburetor with electric choke.

A popular carburetor often used with the intake manifold shown above.

The Edelbrock 1406 Performer carburetor is designed for small block engines with dual plane intake manifolds.

Includes both timed and full vacuum ports for ignition advance.

Includes installation instructions.

The Edelbrock 1406 Perfomer carburetors are quality built and designed to withstand the rigors of daily driving while delivering consistent, reliable street performance.

Metering rods are unaffected by engine backfires and can be changed in seconds for custom tuning without fuel spillage, fuel draining, or removing the carburetor from the manifold.

No power valves to blow out.

An all aluminum two piece body construction allows for no gaskets below the fuel level to prevent leakage. Jets, floats, needles, springs and metering rods can be changed without fuel spillage, with the carburetor installed on the engine.

Edelbrock Performer carburetors "hold a tune" which means that, compared to other brands, when you tune the carburetor to your engine, it stays tuned and remains reliable and consistent.

The outside of the carburetor body is ball burnished for a bright finish.

The Performer series carburetors are user friendly and easy to tune for trouble free service.

EDE-1406$349.97

PayPal Acceptance Mark




We welcome CANADIAN customers! For ordering information, click on "Orders To Canada" at the top left side of this page.

We will not ship to freight forwarding - expediting companies.

PAYMENT METHODS: PayPal, Visa, Mastercard, Discover, American Express, money orders.

ecommerce provided by Yahoo! Small Business