Click to enlarge

Edelbrock 4449 Signature Series Valve Covers

Edelbrock 4449 Signature Series valve covers.

Chevy small block chrome plated valve covers.

Features the OEM height to clear all engine accessory brackets.

Each valve cover has a 1 1/4" diameter hole that has an OEM style internal baffle. This hole is for oil fill, breather caps, and comes with a reducer grommet for pvc usage.

Edelbrock script is stamped in the valve cover.

Sold as a set of 2 Edelbrock 4449 Signature Series valve covers.

Scroll down the page for matching breathers, bolts and gaskets.

Edelbrock 4449 Signature Series Chevy small block short valve covers 4449$59.98

Click to enlargepolished billet aluminum PCV valve
Push in billet aluminum PCV valve.

Works with the valve cover shown above.

Valve is replaceable through the bottom of the aluminum housing.

Sold as one PCV valve.

31BSP22120$32.99
Click to enlargechrome valve cover breathers
Chrome valve cover breathers.

Fits common custom valve cover holes, measuring 1.22".

Breather meaures 2 1/2" in diameter and 2 1/8" tall.

Grommet not included.

Sold as 2 chrome valve cover breathers.

7MRG9810-SPC7199$19.95
Click to enlargeEdelbrock chrome valve cover breathers
Edelbrock 4405 Signature Series valve cover breathers are chrome plated and feature the Edelbrock script.

Fits all push in breather style valve covers with 1 1/4" diameter holes.

Simply pull out of the valve cover for oil filling.

Sold as 2 Edelbrock Signature Series valve cover breathers.

EDE4405$21.95
Click to enlargeChevy Bowite valve cover breathers
Chrome Bowtie breathers for the valve covers shown above.

The top of this chrome breather cap is embossed with the GM Bowtie Logo to provide the genuine GM parts appearance to your engine.

Simply pushes into the valve covers grommet.

Grommet not inlcuded.

Allows not only crankcase ventilation, but can be pulled out of the cover for oil fill and then reinstalled into the cover.

Sold as 2 GM Performance chrome Bowtie breather caps.

6GM141-616$29.95
Click to enlargechrome valve cover bolts and tabs
Chevy Small Block Chrome Valve Cover Bolts & Tabs.

Set include 8 chrome plated hex head bolts and 8 chrome plated hold down tabs.

Bolts measure 1/4"-20 thread.

Works well with the valve cover set shown above.

8MRG9887$19.95
Click to enlargechrome valve cover T-wings
Chrome plated valve cover T-wings are and easy way to attach your valve covers with no tools required!

1/4"-20 thread stud locates the valve cover gasket and you simply tighten the T-wing with your hands.

Stud length is 1" and the T-wing length is 4 1/4" tall.

Designed for the short style valve covers shown above.

Works on Chevrolet small block engines

Sold as a set of 8.

8R9120$29.95
Click to enlargechrome valve cover speed nuts
Chrome plated valve cover speed nuts designed for the valve covers shown above.

Measures 1 3/8" tall and use 1/4" 20 thread with 1" long studs.

The studs locate the valve cover gasket for easy installation.

Nut head design offers easy attachement of the valve cover and a clean appearance.

Works well with the valve covers shown above.

Sold as a set of 8.

7TRA9329-RPC7283$29.98
Click to enlargevalve cover mounting studs
Valve cover stud kit with bullet tip design.

Holds the valve cover gasket in position leaving both hands free to guide the valve cover over the studs.

Complete with zinc plated self locking hex flange nuts assuring a more positive gasket seal.

Clean, race engine appearance. A very professional look.

Features a 1/4" 20 thread and are 1 1/2" long.

Works well with the valve covers shown above.

Sold as a set of 8 studs and nuts.

17MRG6329$19.99
Click to enlargevalve cover spreader bars
Chevrolet small block hold down spreader bars for the valve cover set shown above.

Spreads out the attaching contact points to prevent bending the valve covers base and provides a better gasket seal.

Chrome plated.

Set of 8.

8MRGRPC4993$19.99
Click to enlarge21MRG5860
Mr. Gasket Ultra Seal Chevrolet small block valve cover gasket set for the valve covers shown above.

Measures 3/16" thick.

Manufactured from high density cork/rubber blend gasket material.

Creates a positive seal by controlled swelling of the gasket material when exposed to hot engine oil.

A black latex rubber coating is applied to the outside of the gasket to help seal minor flange irregularities and eliminate the possiblity of oil leakage.

Packaged 2 per set.

21MRG5860$19.99

PayPal Acceptance Mark




We welcome CANADIAN customers! For ordering information, click on "Orders To Canada" at the top left side of this page.

We will not ship to freight forwarding - expediting companies.

PAYMENT METHODS: PayPal, Visa, Mastercard, Discover, American Express, money orders.

ecommerce provided by Yahoo! Small Business