Click to enlarge

Edelbrock RPM Air-Gap NASCAR Edition

Edelbrock 75013 Performer RPM Air-Gap NASCAR Edition intake manifold.

For Chevrolet small block engines.

The NASCAR Edition features a black powder coated finish.

Designed for 1955-1986 small block Chevy engines.

Power band from 1500-6500 rpm.

A tall dual plane design that features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power.

Includes rear water outlets

Two distributor clamp locations.

Nitrous bosses.

Accepts all 1976 and later alternator and A/C brackets for street use.

The heater outlet boss is angled for proper fit over the valve cover.

The temperature sensor boss clears all waternecks.

Works with square bore Holley, Edelbrock, Quick Fuel, Proform and Demon carburetors.

Carb pad height is 4.72", maximum height is 5.25".

Port exit dimensions are 1.14" by 1.95".

TECH NOTES: No provisions exhaust heated chokes, EGR or exhaust crossovers. Will not fit 1987 and newer cast iron heads and will not fit under the stock Corvette hood.

Can be matched up with Edelbrock's black powder coated Victor Series valve covers, breathers and air cleaners, also found on this website.

Edelbrock 75013 RPM Air Gap intake EDELBROCK-75013$394.97

Click to enlargeIntake manifold gaskets for Edelbrock 75013 intake
Edelbrock 7201 high performance intake gasket for Chevy small block engines.

Designed for use with the Edelbrock 75013 intake manifold shown above.

MP-2N Micropore technology uses no solvents in the construction of the gasket, making it environmentally friendly. Impervious to most chemicals, this synthetic fiber composite provides a high recovery under load. This means that when compressed, the gasket will conform to any imperfections on the sealing surface even using lower flange pressures. A nitrite bead around each port opening makes the seal even better.

10EDE-7201$24.97
Click to enlargeIntake manifold bolts for Edelbrock 75013 intake
ARP 134-2001 intake manifold bolt kit for Chevy small block engines.

Features an attractive and durable black oxide coating.

Hexagon bolt heads for easy wrench or socket access.

These chrome moly bolts have a wide underhead flange with companion washers that provide an even load distribution.

Precision rolled threads prevent galling while promoting more consistent torque loading.

Fits the Edelbrock 75013 intake manifold shown above.

5ARP-134-2001$34.97
Stainless intake bolts for Edelbrock 75013 intake
ARP 434-2001 polished stainless steel intake manifold bolt kit for Chevy small block engines.

These stainless steel bolts and washers feature a show polished finish.

Hexagon bolt heads for easy wrench or socket access.

This bolt set has a wide underhead flange with companion washers that provide an even load distribution.

Precision rolled threads prevent galling while promoting more consistent torque loading.

Fits the Edelbrock 75013 intake manifold shown above.

5ARP-434-2001$49.97

PayPal Acceptance Mark




We welcome CANADIAN customers! For ordering information, click on "Orders To Canada" at the top left side of this page.

We will not ship to freight forwarding - expediting companies.

PAYMENT METHODS: PayPal, Visa, Mastercard, Discover, American Express, money orders.

ecommerce provided by Yahoo! Small Business