Edelbrock 75164 RPM Air Gap Vortec Endurashine

Edelbrock 75164 Edelbrock Perfomer RPM Air Gap intake manifold.

For 1996 or newer Vortec cast iron heads or Edelbrock E-Tec cylinder heads.

Power band of 1,500 rpm to 6,500 rpm.

This unique design separates the hot engine valley from the air fuel mixture for a cooler, denser charge and more power throughout the rpm range.

An external water bypass boss is machined into the front of the water crossover for use on the 1996 and newer Vortec production engines.

Includes rear water outlets.

Nitrous bosses.

A temp sensor boss that clears all water necks.

Two distributor clamp locations.

No EGR provision, street legal for pre-emissions equipped engines and vehicles.

Square bore carb mounting flange for square bore Holley, Demon, Edelbrock, Proform and Quick Fuel carburetors.

Recommend 650 cfm to 800 cfm carburetors.

Measures 4.20" tall in the front and 5.25" tall in the rear.

Port dimensions are 2.05" tall with odd shaped width.

The Endurashine finish is a brilliant chrome like finish with the durability of powder coating.

Resists discoloration from heat.

A three step Vacuum Metalizing Process, base coat, aluminum coat, and clear top coat to enhance abrasion and chemical resistance.

No more chrome or aluminum polishing!

Edelbrock 75164 Performer RPM Air Gap intake manifold EDELBROCK-75164$459.97

Click to enlargeVortec intake manifold gaskets for Edelbrock 75614 intake
Edelbrock 7235 high performance intake gasket for Chevy Vortec small block engines.

Designed for use with the Edelbrock 75614 intake manifold shown above.

MP-2N Micropore technology uses no solvents in the construction of the gasket, making it environmentally friendly.

Impervious to most chemicals, this synthetic fiber composite provides a high recovery under load.

This means that when compressed, the gasket will conform to any imperfections on the sealing surface even using lower flange pressures.

A nitrite bead around each port opening makes the seal even better.

5EDE-7235$39.97
Click to enlargeVortec intake manifold bolts for Edelbrock 75614 intake
ARP 134-2002 intake manifold bolt kit for Chevy small block engines.

Fits the Edelbrock 75614 intake manifold shown above.

Features an attractive and durable black oxide coating.

Hexagon bolt heads for easy wrench or socket access.

These chrome moly bolts have a wide underhead flange with companion washers that provide an even load distribution.

Precision rolled threads prevent galling while promoting more consistent torque loading.

4ARP-134-2002$39.97
Click to enlargeStainless Vortec manifold bolts for Edelbrock 75614 intake
ARP 434-2002 polished stainless steel intake manifold bolt kit for Chevy small block engines.

Fits the Edelbrock 75614 intake manifold shown above.

These stainless steel bolts and washers feature a show polished finish.

Hexagon bolt heads for easy wrench or socket access.

This bolt set has a wide underhead flange with companion washers that provide an even load distribution.

Precision rolled threads prevent galling while promoting more consistent torque loading.

4ARP-434-2002$49.97

PayPal Acceptance Mark




We welcome CANADIAN customers! For ordering information, click on "Orders To Canada" at the top left side of this page.

We will not ship to freight forwarding - expediting companies.

PAYMENT METHODS: PayPal, Visa, Mastercard, Discover, American Express, money orders.

ecommerce provided by Yahoo! Small Business