Push in billet aluminum PCV valve.
Works with the valve cover shown above.
Valve is replaceable through the bottom of the aluminum housing.
Sold as one PCV valve.
Chrome valve cover breather.
Fits common custom valve cover holes, measuring 1.22".
Breather meaures 2 1/2" in diameter and 2 1/8" tall.
Grommet not included.
Sold as 2 chrome valve cover breathers.
Chrome Bowtie breathers for the valve covers shown above.
The top of this chrome breather cap is embossed with the GM Bowtie Logo to provide the genuine GM parts appearance to your engine.
Simply pushes into the valve covers grommet.
Grommet not inlcuded.
Allows not only crankcase ventilation, but can be pulled out of the cover for oil fill and then reinstalled into the cover.
Sold as 2 GM Performance chrome Bowtie breather caps.
Chevy Small Block Chrome Valve Cover Bolts & Tabs.
Set include 8 chrome plated hex head bolts and 8 chrome plated hold down tabs.
Bolts measure 1/4"-20 thread.
Works well with the valve cover set shown above.
Chrome plated valve cover T-wings are and easy way to attach your valve covers with no tools required!
1/4"-20 thread stud locates the valve cover gasket and you simply tighten the T-wing with your hands.
Stud length is 1" and the T-wing length is 4 1/4" tall.
Designed for the valve covers shown above.
Works on Chevrolet small block engines
Sold as a set of 8.
Chrome plated valve cover speed nuts designed for the valve covers shown above.
Measures 1 3/8" tall and use 1/4" 20 thread with 1" long studs.
The studs locate the valve cover gasket for easy installation.
Nut head design offers easy attachement of the valve cover and a clean appearance.
Sold as a set of 8.
Valve cover stud kit with bullet tip design.
Holds the valve cover gasket in position leaving both hands free to guide the valve cover over the studs.
Complete with zinc plated self locking hex flange nuts assuring a more positive gasket seal.
Clean, race engine appearance. A very professional look.
Features a 1/4" 20 thread and are 1 1/2" long.
Works well with the valve covers shown above.
Sold as a set of 8 studs and nuts.
Chevrolet small block hold down spreader bars for the valve cover set shown above.
Spreads out the attaching contact points to prevent bending the valve covers base and provides a better gasket seal.
Set of 8.
Mr. Gasket Ultra Seal Chevrolet small block valve cover gasket set for the valve covers shown above.
Measures 3/16" thick.
Manufactured from high density cork/rubber blend gasket material.
Creates a positive seal by controlled swelling of the gasket material when exposed to hot engine oil.
A black latex rubber coating is applied to the outside of the gasket to help seal minor flange irregularities and eliminate the possiblity of oil leakage.
Packaged 2 per set.