Click to enlarge

"350" Chrome Short Style Valve Covers

Chevrolet small block 350 short valve covers.

This high quality chrome plated OEM height valve cover set features the 350 logo stamped in.

Each cover has a hole for pvc or breather use. These holes act as oil fill holes as well.

Baffles are installed inside the cover to help prevent excess oil from exiting the valve cover breathers or pvc.

Nice for engine detailing.

Fits Chevrolet 283, 302, 327, 350, 400 small block engines.

Sold as a set of 2 valve covers.

Choose gaskets, breathers and attacking hardware below.

Chevrolet 350 short style valve covers MRG9423-TD9842$64.98

Click to enlargePolished Stainless Steel Valve Cover Bolts
ARP show polished stainless steel valve cover bolts.

Designed for use with the valve covers shown above.

No more rusting fasteners! Maintenance free!

1/4-20 thread.

Set includes 8 polished stainless steel bolts with 8 polished stainless steel washers.

Click to enlargechrome valve cover bolts & tabs
Chevy Small Block Chrome Valve Cover Bolts & Tabs.

Set include 8 chrome plated hex head bolts and 8 chrome plated hold down tabs.

Bolts measure 1/4"-20 thread.

Works well with the valve cover set shown above.

Click to enlargevalve cover attaching studs
Valve cover stud kit with bullet tip design.

Holds the valve cover gasket in position leaving both hands free to guide the valve cover over the studs.

Complete with zinc plated self locking hex flange nuts assuring a more positive gasket seal.

Clean, race engine appearance. A very professional look.

Features a 1/4" 20 thread and are 1 1/2" long.

Works well with the valve covers shown above.

Sold as a set of 8 studs and nuts.

Click to enlargeValve Cover T-Wing Set
Chrome plated valve cover T-wings are and easy way to attach your valve covers with no tools required!

1/4"-20 thread stud locates the valve cover gasket and you simply tighten the T-wing with your hands.

Stud length is 1" and the T-wing length is 4 1/4" tall.

Designed for the valve covers shown above.

Works on Chevrolet small block engines

Sold as a set of 8.

Click to enlargeValve Cover Speed Nut Set
Chrome plated valve cover speed nuts designed for the valve covers shown above.

Measures 1 3/8" tall and use 1/4" 20 thread with 1" long studs.

The studs locate the valve cover gasket for easy installation.

Nut head design offers easy attachement of the valve cover and a clean appearance.

Sold as a set of 8.

Click to enlargeChrome Valve Cover Spreader Bars
Chevrolet small block hold down spreader bars for the valve cover set shown above.

Spreads out the attaching contact points to prevent bending the valve covers base and provides a better gasket seal.

Chrome plated.

Set of 8.

Click to enlargeChrome Valve Cover Breathers
Chrome valve cover breathers.

Fits common custom valve cover holes, measuring 1.22".

Breather meaures 2 1/2" in diameter and 2 1/8" tall.

Grommet not included.

Sold as 2 chrome valve cover breathers.

Click to enlargeBowtie Valve Cover Breathers
Chrome Bowtie breather caps for the valve covers shown above.

The top of this chrome breather cap is embossed with the GM Bowtie Logo to provide the genuine GM parts appearance to your engine.

Simply pushes into the valve covers grommet.

Grommet not inlcuded.

Allows not only crankcase ventilation, but can be pulled out of the cover for oil fill and then reinstalled into the cover.

Sold as 2 GM Performance chrome Bowtie breather caps.

Click to enlargeChrome Breather PCV Style
Chrome valve cover breather with tube for the valve cover set shown above.

The 5/8" side tube allows for positive crankcase system (PCV) style hookup.

Sold a 1 breather.

Click to enlargepolished billet aluminum PCV valve
Push in billet aluminum PCV valve.

Works with the valve cover shown above.

Valve is replaceable through the bottom of the aluminum housing.

Sold as one PCV valve.

Click to enlargeUltra Seal Valve Cover Gasket Set
Mr. Gasket Ultra Seal Chevrolet small block valve cover gasket set for the valve covers shown above.

Measures 3/16" thick.

Manufactured from high density cork/rubber blend gasket material.

Creates a positive seal by controlled swelling of the gasket material when exposed to hot engine oil.

A black latex rubber coating is applied to the outside of the gasket to help seal minor flange irregularities and eliminate the possiblity of oil leakage.

Packaged 2 per set.

Click to enlargeFelpro Valve Cover Gasket Set
Fel-Pro valve cover gaskets for Chevrolet small block valve covers shown above.

Measures .156" (approximately 5/32") thickness.

Made of Fel-CoPrene synthetic rubber that can offer a longer life than cork-rubber.

Generally, a quick-drying contact adhesive should be used to bond the gasket to the valve cover before installation.

Packaged 2 per set.



1. If there is an applications box, click, then scroll the applications box to find your vehicle.

2. Click on your vehicle.

3. Click "add to cart"

4. Enter your information and submit order.

5. If there is no applications box, then just click "add to cart", then enter your information.

PayPal Acceptance Mark

HOURS: 11:00 am to 6:00 pm Monday - Friday Eastern Standard Time

We welcome CANADIAN customers! For ordering information, click on "Orders To Canada" at the top left side of this page.

We will not ship to freight forwarding - expediting companies.

PAYMENT METHODS: PayPal, Visa, Mastercard, Discover, American Express, money orders.

ecommerce provided by Yahoo! Small Business